Heated Safety Station With Eyewash Div 1

Heated Safety Station With Eyewash Div 1

Heated Safety Station With Eyewash Div 1

Code: GFR3200HV

each
Guardian
  • Class I, Division 1 rated electric heat-traced stations prevent freezing in extremely hazardous, cold weather conditions where flammable gases are routinely expected.
  • Electric heat-traced stations prevent freezing even in extreme conditions
  • FM, UL, and CSA approved for Class I, Division 1, Groups B, C, and D.
  • Unit is fully wired at factory. Junction box and components rated for Class I, Division 1, Groups B, C, and D.
  • Note: In order to meet Class I, Division 1 requirements, approved conduit and fittings must be used during installation.
  • Units are intended for cold weather environments down to -40°C
  • UV-resistant orange ABS plastic with polyethylene foam insulation. Jacket sections secured with removable stainless-steel screws for easy maintenance.
  • 254mm diameter orange ABS plastic with 75.7LPM flow control.
  • 1" IPS brass stay-open ball valve. US-made with brass ball and PTFE seals. Includes stainless steel actuating arm and 737mm stainless steel pull rod.
  • 1-1/4" NPT female top inlet.
  • Comes wired ready to connect to 240V power supply.
  • Comes with ANSI compliant signage
  • We recommend that this unit be installed with a series tempering valve to meet the ANSI requirement of “tepid” water supply.
  • Factory tested prior to shipment. Ships fully assembled and crated.
  • Stocked Item: No - these are made to order, allow 6-8 weeks for manufacture and shipping.

Contact Details

Request More Information

Details of the product above will be automatically included with your enquiry.

 
 


CATEGORIES